← Computer Engineering
ACtEFull syllabus
Computer Engineering — Syllabus
NEC Registration Examination · a complete map of every chapter, sub-topic and topic you need to cover.
10
Chapters
10
Ready to study
60
Sub-topics
59
Topics
Study material ready10 / 10 chapters · 100%
10 chapters
1.1Basic conceptAExE0101
- 1.Ohm´s law, electric voltage current, power and energy, conducting and insulating materials. Series and parallel electric circuits, start-delta and delta-star conversion, Kirchhoff’s law, linear and non-linear circuit, bilateral and unilateral circuits, active and passive circuits.
1.2Network theoremsAExE0102
- 1.concept of superposition theorem, Thevenin`s theorem, Norton`s theorem, maximum power transfer theorem. R-L, R-C, R-L-C circuits, resonance in AC series and parallel circuit, active and reactive power.
1.3Alternating current fundamentalsAExE0103
- 1.Principle of generation of alternating voltages and currents and their equations and waveforms, average, peak and rms values. Three phase system.
1.4Semiconductor devicesAExE0104
- 1.Semiconductor diode and its characteristics, BJT Configuration and biasing, small and large signal model, working principle and application of MOSFET and CMOS.
1.5Signal generatorAExE0105
- 1.Basic Principles of Oscillator, RC, LC and Crystal Oscillators Circuits. Waveform generators.
1.6AmplifiersAExE0106
- 1.Classification of Output Stages, Class A Output Stage, Class B Output Stage, Class AB Output Stage, Biasing the Class AB Stage, Power BJTs, Transformer-Coupled Push-Pull Stages, and Tuned Amplifiers, op-amps.
2.1Digital logicAExE0201
- 1.Number Systems, Logic Levels, Logic Gates, Boolean algebra, Sum-of-Products Method, Product-of-Sums Method, Truth Table to Karnaugh Map.
2.2Combinational and arithmetic circuitsAExE0202
- 1.Multiplexetures, Demultiplexetures, Decoder, Encoder, Binary Addition, Binary Subtraction, operation on Unsigned and Signed Binary Numbers
2.3 Sequential logic circuitAExE0203
- 1.RS Flip-Flops, Gated Flip-Flops, Edge Triggered Flip-Flops, Mater- Slave Flip-Flops. Types of Registers, Applications of Shift Registers, Asynchronous Counters, Synchronous Counters.
2.4MicroprocessorAExE0204
- 1.Internal Architecture and Features of microprocessor, Assembly Language Programming.
2.5 Microprocessor systemAExE0205
- 1.Memory Device Classification and Hierarchy, Interfacing I/O and Memory Parallel Interface. Introduction to Programmable Peripheral Interface (PPI), Serial Interface, Synchronous and Asynchronous Transmission, Serial Interface Standards. Introduction to Direct Memory Access (DMA) and DMA Controllers.
2.6Interrupt operationsAExE0206
- 1.Interrupt, Interrupt Service Routine, and Interrupt Processing
3.1Introduction to C programmingACtE0301
- 1.C Tokens, Operators, Formatted/Unformatted Input/output, Control Statements, Looping, User-defined functions, Recursive functions, Array (1-D, 2-D, Multidimensional), and String manipulations.
3.2Pointers, structure and data files in C programmingACtE0302
- 1.Pointer Arithmetic, Pointer and array, passing pointer to function, Structure vs Union, array of structure, passing structure to function, structure and pointer, Input/output operations on files, and Sequential and Random Access to File
3.3C++ language constructs with objects and classesACtE0303
- 1.Namespace, Function Overloading, Inline functions, Default Argument, Pass/Return by reference, introduction to Class and object, Access Specifiers, Objects and the Member Access, Defining Member Function, Constructor and its type, and Destructor, Dynamic memory allocation for objects and object array, this Pointer, static Data Member and static Function, Constant Member Functions and Constant Objects, Friend Function and Friend Classes
3.4Features of object-oriented programmingACtE0304
- 1.Operator overloading (unary, binary), data conversion, Inheritance (single, multiple, multilevel, hybrid, multipath), constructor/destructor in single/multilevel inheritances.
3.5Pure virtual function and file handlingACtE0305
- 1.Virtual function, dynamic binding, defining opening and closing a file, Input / Output operations on files, Error handling during input/output operations, Stream Class Hierarchy for Console Input /Output, Unformatted Input /Output Formatted Input /Output with ios Member functions and Flags, Formatting with Manipulators.
3.6Generic programming and exception handlingACtE0306
- 1.Function Template, Overloading Function Template, Class Template, Function Definition of Class Template, Standard Template Library (Containers, Algorithms, Iterators), Exception Handling Constructs (try, catch, throw), Multiple Exception Handling, Rethrowing Exception, Catching All Exceptions, Exception with Arguments, Exceptions Specification for Function, Handling Uncaught and Unexpected Exceptions
4.1Control and central processing unitsACtE0401
- 1.Control Memory, addressing sequencing, Computer configuration, Microinstruction Format, Design of control unit, CPU Structure and Function, Arithmetic and logic Unit, Instruction formats, addressing modes, Data transfer and manipulation, RISC and CISC Pipelining parallel processing.
4.2Computer arithmetic and memory systemACtE0402
- 1.Arithmetic and Logical operation, The Memory Hierarchy, Internal and External memory, Cache memory principles, Elements of Cache design - Cache size, Mapping function, Replacement algorithm, write policy, Number of caches, Memory Write Ability and Storage Permanence, Composing Memory.
4.3Input-Output organization and multiprocessorACtE0403
- 1.Peripheral devices, I/O modules Input-output interface, Modes of transfer Direct Memory access, Characteristics of multiprocessors, Interconnection Structure, Inter-processor Communication and synchronization.
4.4Hardware-Software design issues on embedded systemACtE0404
- 1.Embedded Systems overview, Classification of Embedded Systems. Custom Single-Purpose Processor Design, Optimizing Custom Single-Purpose Processors, Basic Architecture, Operation and Programmer’s View, Development Environment. Application-Specific Instruction-Set Processors.
4.5Real-Time operating and control systemACtE0405
- 1.Operating System Basics, Task, Process, and Threads, Multiprocessing and Multitasking, Task Scheduling, Task Synchronization, Device Drivers, Open-loop and Close-Loop control System overview, Control.
4.6Hardware descripts language and IC technologyACtE0406
- 1.VHDL Overview, Overflow and data representation using VHDL. Design of combinational and sequential logic using VHDL. Pipelining using VHDL.
5.1Introduction to computer networks and physical layerACtE0501
- 1.Networking model, Protocols and Standards, OSI model and TCP/IP model, Networking Devices (Hubs, Bridges, Switches, and Routers) and Transmission media.
5.2Data link layerACtE0502
- 1. Services, Error Detection and Corrections, Flow Control, Data Link Protocol, Multiple access protocols, LAN addressing and ARP (Address Resolution Protocol), Ethernet, IEEE 802.3(Ethernet), 802.4(Token Bus), 802.5(Token Ring), CSMA/CD, Wireless LANs, PPP (Point to Point Protocol), Wide area protocols.
5.3 Network layerACtE0503
- 1.Addressing (Internet address, classful address), Subnetting, Routing Protocols (RIP, OSPF, BGP, Unicast and multicast routing protocols), Routing algorithms (shortest path algorithm, flooding, distance vector routing, link state routing) Routing Protocols (ARP, RARP, IP, ICMP), and IPv6 (Packet formats, Extension headers, Transition from IPv4 to IPv6, and Multicasting)
5.4Transport layerACtE0504
- 1.The transport service, Transport protocols, Port and Socket, Connection establishment & Connection release, Flow control & buffering, Multiplexing & de-multiplexing, Congestion control algorithm
5.5 Application layerACtE0505
- 1.Web (HTTP & HTTPS), File Transfer (FTP, PuTTY, Win SCP), Electronic Mail, DNS, P2P Applications, Socket Programming, Application server concept, and Concept of traffic analyzer (MRTG, PRTG, SNMP, Packet tracer, Wireshark).
5.6Network securityACtE0506
- 1.Types of Computer Security, Types of Security Attacks, Principles of cryptography, RSA Algorithm, Digital Signatures, securing e-mail (PGP), Securing TCP connections (SSL), Network layer security (IPsec, VPN), Securing wireless LANs (WEP), Firewalls
6.1Introduction to finite automataACtE0601
- 1.Introduction to Finite Automata and Finite State Machine, Equivalence of DFA and NDFA, Minimization of Finite State Machines, Regular Expressions, Equivalence of Regular Expression and Finite Automata, Pumping lemma for regular language.
6.2Introduction to context free languageACtE0602
- 1.Introduction to Context Free Grammar (CFG), Derivative trees (Bottom-up and Top-down approach, Leftmost and Rightmost, Language of a grammar), Parse tree and its construction, Ambiguous grammar, Chomsky Normal Form (CNF), Greibach Normal Form (GNF), Backus-Naur Form (BNF), Push down automata, Equivalence of context free language and PDA, Pumping lemma for context free language, and Properties of context free Language
6.3Turing machineACtE0603
- 1.Introduction to Turing Machines (TM), Notations of Turing Machine, Acceptance of a string by a Turing Machines, Turing Machine as a Language Recognizer, Turing Machine as a Computing Function, Turing Machine as a enumerator of stings of a language, Turing Machine with Multiple Tracks, Turing Machine with Multiple Tapes, Non-Deterministic Turing Machines, Curch Turing Thesis, Universal Turing Machine for encoding of Turing Machine, Computational Complexity, Time and Space complexity of A Turing Machine, Intractability, Reducibility
6.4Introduction of computer graphicsACtE0604
- 1.Overview of Computer Graphics, Graphics Hardware (Display Technology, Architecture of Raster-Scan Displays, Vector Displays, Display Processors, output device and Input Devices), Graphics Software and Software standards.
6.5Two-dimensional transformationACtE0605
6.6Three-dimensional transformationACtE0606
- 1.Three-dimensional translation, rotation, scaling, reflection, shear transformation, 3D composite transformation, 3D viewing pipeline, projection concepts (Orthographic, parallel, perspective projection)
7.1Introduction to data structure, list, linked lists and treesACtE0701
- 1.data types, data structures and abstract data types; time and space analysis of algorithms (Big oh, omega and theta notations), Linear data structure (Stack and queue implementation); Stack application: infix to postfix conversion, and evaluation of postfix expression, Array implementation of lists; Stack and Queues as list; and Static list structure, Static and dynamic list structure; Dynamic implementation of linked list; Types of Linked list: Singly Linked list, Doubly Linked list, and Circular Linked list; Basic operations on Linked list: creation of linked list, insertion of node in different positions, and deletion of nodes from different positions; Doubly linked lists and its applications, Concept of Tree, Operation in Binary tree, Tree search, insertion/deletions in Binary Tree, Tree traversals (pre-order, post-order and in-order), Height, level and depth of a tree, AVL balanced trees.
7.2Sorting, searching, and graphsACtE0702
- 1.types of sorting: internal and external; Insertion and selection sort; Exchange sort; Merge and Redix sort; Shell sort; Heap sort as a priority queue; Big ‘O’ notation and Efficiency of sorting; Search technique; Sequential search, Binary search and Tree search; General search tree; Hashing: Hash function and hash tables, and Collision resolution technique, Undirected and Directed Graphs, Representation of Graph, Transitive closure of graph, Warshall’s algorithm, Depth First Traversal and Breadth First Traversal of Graph, Topological sorting (Depth first, Breadth first topological sorting), Minimum spanning trees ( Prim’s, Kruskal’s and Round- Robin algorithms), Shortest-path algorithm (Greedy algorithm, and Dijkstra’s Algorithm)
7.3Introduction to data models, normalization, and SQLACtE0703
- 1.Data Abstraction and Data Independence, Schema and Instances, E-R Model, Strong and Weak Entity Sets, Attributes and Keys, and E-R Diagram, Different Normal Forms (1st, 2nd, 3rd, BCNF), Functional Dependencies, Integrity Constraints and Domain Constraints, Relations (Joined, Derived), Queries under DDL and DML Commands, Views, Assertions and Triggering, Relational Algebra, Query Cost Estimation, Query Operations, Evaluation of Expressions, Query Optimization, and Query Decomposition.
7.4 Transaction processing, concurrency control and crash recoveryACtE0704
- 1.ACID properties, Concurrent Executions, Serializability Concept, Lock based Protocols, Deadlock handling and Prevention, Failure Classification, Recovery and Atomicity, and Log-based Recovery.
7.5Introduction to Operating System and process managementACtE0705
- 1.Evolution of Operating System, Type of Operating System, Operating System Components, Operating System Structure, Operating System Services, Introduction to Process, Process description, Process states, Process control, Threads, Processes and Threads, and Types of scheduling, Principles of Concurrency, Critical Region, Race Condition, Mutual Exclusion, Semaphores and Mutex, Message Passing, Monitors, and Classical Problems of Synchronization.
7.6Memory management, file systems and system administrationACtE0706
- 1.Memory address, Swapping and Managing Free Memory Space, Virtual Memory Management, Demand Paging, Performance, and Page Replacement Algorithms, introduction to File, Directory and File Paths, File System Implementation, Impact of Allocation Policy on Fragmentation, Mapping File Blocks on The Disk Platter, File System Performance, Administration Tasks, User Account Management, Start and Shutdown Procedures.
8.1Software process and requirementsACtE0801
- 1.Software characteristics, Software quality attributes, Software process model (Agile Model, V-Model, Iterative Model, Prototype Model, and Big Bang Model), Computer-aided software engineering, Functional and non –functional requirements, User requirements, System requirement, Interface specification, The software requirements documents, Requirement’s elicitation and analysis, and Requirement’s validation and management
8.2Software designACtE0802
- 1. Design process, Design Concepts, Design Mode, Design Heuristic, Architectural 5 design decisions, System organization, Modular decomposition styles, Control styles, Reference architectures, Multiprocessor architecture, Client –server architectures, Distributed object architectures, Inter-organizational distributed computing, Real –time software design, and Component-based software engineering.
8.3Software testing, cost estimation, quality management, and configuration managementACtE0803
- 1.Unit Testing, Integration testing, System testing, Component testing, Acceptance Testing, Test case design, Test automation, Metrics for testing, Algorithmic cost modeling, Project duration and staffing, Software quality assurance, Formal technical reviews, Formal approaches to SQA, Statistical software quality assurance, A framework for software metrics, Matrices for analysis and design model, ISO standards, CMMI, SQA plan, Configuration management planning, Change management, Version and release management, and CASE tools for configuration management.
8.4Object-oriented fundamentals and analysisACtE0804
- 1.Defining Models, Requirement Process, Use Cases, Object Oriented Development Cycle, Unified Modeling Language, Building Conceptual Model, Adding Associations and Attributes, and Representation of System Behavior.
8.5Object-oriented designACtE0805
- 1.Analysis to Design, Describing and Elaborating Use Cases, Collaboration Diagram, Objects and Patterns, Determining Visibility, and Class Diagram.
8.6Object-oriented design implementationACtE0806
- 1. Programming and Development Process, Mapping Design to Code, Creating Class Definitions, from Design Class Diagrams, Creating Methods from Collaboration Diagram, Updating Class Definitions, Classes in Code, and Exception and Error Handling
9.1Introduction to AI and intelligent agentACtE0901
- 1.Concept of Artificial Intelligence, AI Perspectives, History of AI, Applications of AI, Foundations of AI, Introduction of agents, Structure of Intelligent agent, Properties of Intelligent Agents, PEAS description of Agents, Types of Agents: Simple Reflexive, Model Based, Goal Based, Utility Based; and Environment Types: Deterministic, Stochastic, Static, Dynamic, Observable, Semi-observable, Single Agent, Multi Agent
9.2Problem solving and searching techniquesACtE0902
- 1.Definition, Problem as a state space search, Problem formulation, Well-defined problems, Constraint satisfaction problem, Uninformed search techniques (Depth First Search, Breadth First Search, Depth Limited Search, Iterative Deepening Search, Bidirectional Search), Informed Search (Greedy Best first search, A* search, Hill Climbing, Simulated Annealing), Game playing, Adversarial search techniques, Mini-max Search, and Alpha-Beta Pruning.
9.3Knowledge representationACtE0903
- 1.Knowledge representations and Mappings, Approaches to Knowledge Representation, Issues in Knowledge Representation, Semantic Nets, Frames, Propositional Logic(PL) (Syntax, Semantics, Formal logic-connectives, tautology, validity, well-formed-formula, Inference using Resolution), Predicate Logic (FOPL, Syntax, Semantics, Quantification, Rules of inference, unification, resolution refutation system), Bayes' Rule and its use, Bayesian Networks, and Reasoning in Belief Networks.
9.4Expert system and natural language processingACtE0904
- 1.Expert Systems, Architecture of an expert system, Knowledge acquisition, Declarative knowledge vs Procedural knowledge, Development of Expert Systems, Natural Language Processing Terminology, Natural Language Understanding and Natural Language Generation, Steps of Natural Language Processing, Applications of NLP, NLP Challenges, Machine Vision Concepts, Machine Vision Stages, and Robotics
9.5Machine learningACtE0905
- 1.Introduction to Machine Learning, Concepts of Learning, Supervised, Unsupervised and Reinforcement Learning, Inductive learning (Decision Tree), Statistical-based Learning (Naive Bayes Model), Fuzzy learning, Fuzzy Inferences System, Fuzzy Inference Methods, Genetic Algorithm (Genetic Algorithm Operators, Genetic Algorithm Encoding, Selection Algorithms, Fitness 6 function, and Genetic Algorithm Parameters).
9.6Neural networksACtE0906
- 1.Biological Neural Networks Vs. Artificial Neural Networks (ANN), McCullochPitts Neuron, Mathematical Model of ANN, Activation functions, Architectures of Neural Networks, The Perceptron, The Learning Rate, Gradient Descent, The Delta Rule, Hebbian learning, Adaline network, Multilayer Perceptron Neural Networks, Backpropagation Algorithm, Hopfield Neural Network
10.1Engineering drawings and its conceptsAALL1001
- 1.Fundamentals of standard drawing sheets, dimensions, scale, line diagram, orthographic projection, isometric projection/view, pictorial views, and sectional drawing.
10.2Engineering EconomicsAALL1002
- 1.understanding of project cash flow; discount rate, interest and time value of money; basic methodologies for engineering economics analysis (Discounted Payback Period, NPV, IRR & MARR); comparison of alternatives, depreciation system and taxation system in Nepal.
10.3Project planning and schedulingAALL1003
- 1.project classifications; project life cycle phases; project planning process; project scheduling (bar chart, CPM, PERT); resources levelling and smoothing; monitoring/evaluation/controlling.
10.4Project managementAALL1004
- 1.Information system; project risk analysis and management; project financing, tender and its process, and contract management.
10.5Engineering professional practiceAALL1005
- 1.Environment and society; professional ethics; regulatory environment; contemporary issues/problems in engineering; occupational health and safety; roles/responsibilities of Nepal Engineers Association (NEA).
10.6Engineering Regulatory BodyAALL1006
- 1.Nepal Engineering Council (Acts & Regulations)